Follow Us:FacebookeLinkedinTwitterCall - Ridge Engineering, Inc.(410) 239-7716Email - Ridge Engineering, Inc. ridgeeng@ridgeeng.com
CAPABILITIESAluminum Dip and
Vacuum Brazing >
CNC Turning and Milling >CNC Wire and Ram
Electrical Discharge
Operations >
Precision Laser Cutting >Precision Waterjet Cutting >PORTFOLIOS5 Axis CNC Milling of a
Titanium Keel Fitting
for the Aerospace Industry >
Dip Brazing of an Aluminum
Fin Field for the Military Industry >
CNC Milling of a Copper Heat Sink
for the Aerospace Industry >
Fabrication of an Aluminum
Housing for the Military Industry >
CNC Milling of an Aluminum
Bus Adapter for the
Aerospace Industry >
Dip Brazing of an Aluminum
Chassis for the Military Industry >
Printable PagePrintable Page Email This PageEmail This Page

CNC Milling of an Aluminum Bus Adapter for the Aerospace Industry

The aluminum bus adaptor shown here was fabricated from 1.6" thick, 6061-T6 aluminum for an aerospace application. After reviewing the customer supplied 2D drawings, we determined that this product would require precision CNC milling. The drawing called out dimensions of 10" in length, 9" in width, and 1.6" in height, it also indicated that tolerances of ±0.001" would be required.

We manufacture approximately 100 of these components for this customer annually, which also feature raw surface finish, with surface roughness of 32 RMS. This bus adaptor was also Chromated to Mil-spec MIL-DTL-5541. To learn more about this precision milling project, see the table below or contact us directly.

  CNC Milling of an Aluminum Bus Adapter for the Aerospace Industry
click on the image to enlarge
CNC Milling of an Aluminum Bus Adapter for the Aerospace Industry
Request for Quote

CNC Milling of an Aluminum Bus Adapter Project Details

Precision CNC Milling Capabilities Applied/Processes Primary:
CNC Milling
Overall Part Dimensions Length: 10"
Width: 9"
Height: 1.6"
Tightest Tolerances ±0.001"
Material Used 6061-T6 Aluminum
Thickness: 1.6"
Material Finish Surface Roughness: 32 RMS
Color: Matte/Raw
Industry for Use Aerospace
Volume Less than 100 annually
Standards Met Customer Specifications, 2D CAD Drawing
ISO 9001:2008
  • MIL-DTL-5541
Product Name Bus Adapter
View Other Portfoliosback to top